Scouter hybrid UAV flying above a forested ridge under a blue sky.
AI-Scout flying toward a small target drone across a clear blue sky.

Robotics, autonomy and onboard processing

Autonomous aerial robotics, built in Canada.

Skyscouter designs and builds autonomous aircraft, the onboard AI that flies them and the data processing behind them, in Port Coquitlam, British Columbia.

AI-Scout autonomy

Sees, tracks and captures a drone in flight.

A radar or other sensor cues AI-Scout, its onboard cameras and AI lock on, and an operator approves every capture.

Endurance
5hScouter, up to, no payload
Range
200kmScouter operational range
Payload
10kgScouter maximum, for 1 hour
Flight record
1,500+hOperational flight hours
Robotics in-houseAirframes, circuit boards, flight firmware, ground software and onboard AI, built by one team.
First capture in flightAI-Scout captured a target drone in flight in August 2026.
Innovative Solutions CanadaSelected in the Attritable Interceptors challenge.
100% CanadianDesigned, built and owned in British Columbia.

Platforms

Two platforms. One autonomy team.

Scouter stays in the air for hours to collect data over large areas. AI-Scout finds, tracks and captures drones on its own, with an operator approving each capture. Both are designed and built in British Columbia.

Long-range data collection

Scouter Hybrid UAV

A hybrid gas-electric UAV with up to five hours of endurance, for long-range surveillance, inspection, mapping and BVLOS operations.

Scouter hybrid UAV, three-quarter view, showing eight rotors on carbon arms around a central generator.
Endurance
Up to 5 h
Range
200 km
MTOW
25 kg

Autonomous capture

AI-Scout

A reusable aerial robot. Onboard cameras and AI find and track a drone, and AI-Scout captures it in flight and brings it down whole, with an operator approving every capture.

AI-Scout, a black H-frame electric quadcopter with antennas, carbon-fibre arms and four propellers.
Top speed
100 km/h
Captures
Up to 2
Defeat
Capture
AI-Scout during flight testing. No audio.

AI-Scout in flight

From the bench to the open range.

AI-Scout flies with onboard cameras and AI, and an operator approves every capture. See the radar, launch, lock-on and landing in the field footage.

Hardware and software

Built in-house, from circuit board to cockpit.

We design the aircraft, the electronics, the flight firmware, the ground software and the AI ourselves, so every layer of the system is ours to improve.

Skyscouter ground-control HUD at night: a GO status with system checks, a 3D view of the octocopter, altitude, speed, distance from home and fuel.
Our ground-control HUD, night theme.
  • Ground-control HUD

    Our own ground-control software: go/no-go system checks, live telemetry, RTK positioning and one-touch return and land, in day and night themes, in a browser or on a handheld controller.

  • Flight controller firmware

    Customized flight controller firmware for our aircraft, maintained by our own engineers.

  • SKY programmer

    Our own tool for reading and configuring the motor controllers on our aircraft.

  • Circuit boards

    Custom boards designed in-house, such as the fuel-gauge boards for Scouter’s hybrid generator.

  • Onboard AI

    Detection, classification and tracking models trained by our machine vision team and run on the aircraft.

Scouter engineering

Hours of endurance, minutes to deploy.

A hybrid generator gives Scouter longer missions than fully electric drones, in an airframe with five-minute attachment and detachment.

Scouter hybrid UAV seen from the side on its landing gear, with the gas-electric generator mounted on top of the central fuselage.
Scouter dimensions: 1,800 mm centre to centre and 650 mm tall with landing gear. Drawing is illustrative and not to scale.
  • 1,800 mmReady to fly, centre to centre
  • 650 mmHeight with gear (350 mm without)
  • 25 kgMaximum takeoff weight

Overlay is illustrative and not to scale.

Endurance

  • Up to 5 hours at sea level
  • Up to 10 kg payload capacity
  • 25 kg maximum takeoff weight
  • RGB and thermal for day and night

Hybrid power

  • Hybrid fuel-electric system
  • High-efficiency power generator
  • Quick refuelling between sorties
  • Low maintenance requirements

Fast deployment

  • Attach and detach in 5 minutes
  • Compact carrying solution
  • Autonomous takeoff and landing
  • User-friendly mechanisms

Built-in safety

  • Onboard obstacle detection
  • Emergency recovery parachute
  • Built for BVLOS operations
  • Durable in tough conditions

Built in Port Coquitlam

Sovereign capability starts on the shop floor.

Skyscouter designs, machines, assembles and flies its own aircraft. Controlling the build means faster iteration, and full control of the hardware and software that fly.

  • CNC milling, routing and lathe machining
  • FDM 3D printing and vacuum forming
  • PCB assembly and electronics integration
  • Temperature calibration and flight testing
Scouter assembly at the Skyscouter workshop. 10-second clip, no audio.

Recognition

Recognized and supported in Canada.

The programs, funders, partners and events behind Skyscouter’s work.

Start the right conversation.

Operators and partners

Put a platform on your mission

Talk through your requirement with the team that builds the aircraft, from platform selection to deployment and training.

Investors

Canadian autonomy, with a flight record

Two autonomous platforms, hardware and software built in-house, a first in-flight capture in August 2026 and more than 1,500 operational flight hours.

About Skyscouter

What does Skyscouter do?

Skyscouter is a Canadian robotics and autonomy company. It designs and builds autonomous aircraft, onboard AI and data processing for inspection, mapping, surveillance and other demanding operations. Its two platforms are Scouter, a long-range hybrid UAV, and AI-Scout, an autonomous aerial robot that captures drones in flight.

Where is Skyscouter based?

Skyscouter is based at Unit 12, 1770 McLean Ave, Port Coquitlam, British Columbia, Canada, where its platforms are designed and built.

When was Skyscouter founded?

Skyscouter was founded in British Columbia in 2017. Its aircraft have flown commercial missions in forestry, oil and gas inspection and pipeline monitoring, building more than 1,500 flight hours of operational experience.